Drolet Wood Stove Breakdown

When it comes to heating your home, an efficient drolet wood stove is one of the best solutions you can choose. Not only does it offer reliable, affordable heat but it can also be a great source of ambient warmth in your living space. But, as with any heating appliance, there are certain factors to consider when selecting a drolet wood stove and correctly calculating the area that needs to be heated.

The first step when selecting a drolet wood stove is to determine how effective the insulation in your home is. The better insulated a home is, the less heat escapes through walls, floors and windows and the more efficient a drolet wood stove will run. The number, type and orientation of doors and windows as well as the thermal resistance of walls all have an impact on insulation and must be taken into account when choosing an appropriate drolet wood stove for your home.

Drolet ECO-55 ST Pellet Stove | DP00071

Another factor to consider when selecting a drolet wood stove is how it will be used. Sustained use refers to having the drolet wood stove as a primary source of heat while ambient use means that it will primarily serve as an auxiliary heater for providing warmth in specific areas around the appliance. The more intense the use, the more important it becomes to evaluate performance and select a drolet wood stove accordingly.

Once you’ve settled on which drolet wood stove you want to purchase, you need to calculate what size area needs to be heated so that you choose one with sufficient power for your needs. To do this accurately, take 100% of the area of floor space where the drolet wood stove will be installed plus 50% of any floor above plus 25% of any additional storeys if applicable—for example if you have an 800 ft² 2-storey house then your theoretical area should total 1,400 ft².

It’s worth noting though that certain factors such as humidity levels in your home, air circulation between rooms and quality of fuel all impact performance so adjusting these figures by 15–35%, depending on if you have an optimum or less favourable environment respectively may be required. An optimum environment would mean that it’s mainly being used for ambient purposes with a well-insulated home and good air circulation which calls for adding approximately 200 ft² onto the calculated area whereas poorer insulation or no air circulation apart from in heated rooms means adding up 400–600 ft² onto the final figure should ensure optimal performance from your drolet wood stove. 

Moreover, larger drolet stoves provide greater heating capacity (i.e., they are able to heat larger areas) compared to smaller ones but at times people make small fires more frequently which reduces efficiency while constantly running stoves at maximum capacity can lead them wearing out prematurely so assessing your actual requirements carefully before making a decision is important too! If unsure about what size drolet wood stove would work best for you given climate conditions etc., there are helpful maps available which provide recommended areas per climate zone—a quick lookup can save you time and money later down the line!

 In Conclusion 

Finally make sure you consult user manuals prior to installing/using any drolet stoves since these usually outline requirements needed for both scenarios so everything runs smoothly afterwards; some items such as blowers or heat shields improve performance significantly while legs or bases may add aesthetic appeal instead so look out for these features when comparing options!